Canton Electrical Company handles the full range of residential and commercial electrical work across Canton, Cherokee County, and the surrounding area. Whether you have a dead outlet, a panel that needs replacing, or a new circuit to run for an appliance or EV charger, we take the call and get the job on the schedule. We are available every day from 6:30 AM to 9:00 PM, and the price is confirmed before anything is booked.
Dependable service. A price agreed before we start. Local know-how.
Call (470) 749-3242 to describe the job and get a quote.
Calling an electrician doesn't have to be stressful, and most repair calls start with a simple question: what is the symptom and where is it showing up. Dead outlets, flickering lights, a breaker that keeps tripping, a burning smell near a switch, sparking from a receptacle, or power missing from one part of the house are all problems we diagnose on a visit. We check the outlet, the circuit, the panel, and the grounding and bonding along the way. GFCI and AFCI protection issues show up more often than most homeowners expect, and arc-fault or ground-fault breakers are a common part of the fix in older Cherokee County homes.
We keep you informed from diagnosis to final test. You hear what we found, what caused it, and what the repair involves before any work begins. Nothing moves forward until you know what you are paying for and why.
Reach out and describe what the breaker is doing.
Good electrical work isn't complicated, it's just done right, and the outlet and lighting side of the job is where most homeowners spend their time. We install GFCI and AFCI outlets, USB outlets, outdoor weatherproof receptacles, and standard replacements throughout the home. Switch upgrades cover dimmers, smart switches, and three-way configurations. Ceiling fan installation and wiring is a regular part of the schedule, whether the box is already in place or needs to be added.
On the lighting side, we handle recessed lighting layouts, LED retrofits, under-cabinet lighting, light fixture and chandelier swaps, and exterior and security lighting. Motion sensor lights and floodlights for driveways, garages, and back yards are common requests. All wiring is run to code, and every installation is tested before we leave the property.
Call and we'll handle the lights, outlets, and panel.
Your time matters, so we keep the wiring job moving, whether that means running a dedicated circuit for a dryer, a washer, a refrigerator, a microwave, or a large appliance that needs its own breaker. Dedicated circuits protect the appliance and keep the rest of the panel from carrying a load it was not sized for. We do the load calculation before the circuit goes in so the panel can handle what is being added.
Wiring for home additions, garages, workshops, and outbuildings is a regular part of what we do. If you are finishing a basement and need circuits for lighting, outlets, and a sump pump, that work fits the same visit as the rest of the rough-in. Hot tub and pool electrical, outdoor wiring, and underground circuit runs are all on the list. Where a new air conditioning unit needs a dedicated circuit, a disconnect, and panel capacity to carry the load, we handle the electrical supply side of that installation.
Pick up the phone and we'll handle the wiring.
The work we do spans single-family homes, rental properties, commercial spaces, and new construction. Property managers and landlords across Canton call us for panel work, circuit repairs, and outlet upgrades between tenants. Retail spaces and office build-outs need wiring and panel capacity planned before the walls close. New construction rough-in is part of the commercial side, along with commercial panel upgrades and wiring for growing businesses in Cherokee County.
Local means we care what the neighbors think. Electrical service scheduled without the runaround is how every job starts: you call, describe the scope, and get a price before anything is put on the calendar.
A panel upgrade replaces an undersized or outdated breaker box with one that can carry the load the house or building actually needs. A 100-amp service was adequate for homes built decades ago, but a 200-amp upgrade is now standard for most residential properties, and some larger homes or commercial spaces need more. We handle the full scope: panel replacement, service entrance work, meter coordination, and subpanel installation where a detached garage or addition needs its own distribution point. Cherokee County has a mix of older housing stock and newer neighborhoods that have added EV chargers, home additions, and large appliances over time. When the panel can no longer carry the load safely, an upgrade is the right fix.
Connecting a generator to the house panel involves more than running a cord. A transfer switch or interlock kit is what keeps the generator and the utility supply from feeding back into each other, and getting that installation right is the part that matters most. We wire standby generators, install manual and automatic transfer switches, and handle the interlock kit installations that let a portable generator power selected circuits during an outage. Georgia's storm season brings severe thunderstorms and the occasional tornado or ice storm to Cherokee County, and the power outages that follow can last longer than most households plan for. A properly wired generator hookup means the circuits you need most are available when the grid is not.
A whole-home surge protector installs at the panel and puts a barrier between every circuit in the house and the voltage spikes that travel through the utility line. North Georgia summers bring frequent lightning activity, and a direct or nearby strike can push a surge through every outlet in the home simultaneously. Modern Canton homes carry more sensitive electronics and smart-home devices than the wiring was originally planned around. A panel-mounted surge protector handles the large spikes from outside while grounding and bonding throughout the system handles the smaller ones that originate inside the house. It is a straightforward installation with a practical return.
From older homes to new commercial builds, EV charger installation starts with a panel capacity check. A Level 2 charger runs on a 240-volt dedicated circuit, and the panel needs room for a breaker sized to match the charger before anything is wired. We assess the panel first, add capacity if the load calculation calls for it, run the dedicated circuit to the garage or parking area, and install the outlet or hardwired connection the charger requires. Tesla chargers and other home EV charger systems follow the same wiring process. Commercial properties adding chargers for employees or customers need the same circuit planning scaled to the number of units.
Electrical work done to the standard the next inspection expects is how every EV charger installation leaves the property.
An electrical safety inspection covers the panel, the wiring, the grounding and bonding, outlet and switch condition, GFCI and AFCI protection, and any visible signs of damage or code deficiency. Inspections come up before a home sale, after a purchase, following storm damage, or when a homeowner wants a clear picture of what the wiring looks like. You get a report of what was found and what, if anything, needs attention.
Older homes in the Canton area sometimes carry knob-and-tube wiring, aluminum branch-circuit wiring, or wiring that has been modified over the years without following a consistent standard. Knob-and-tube replacement and aluminum wiring remediation are jobs we handle in full, running new code-compliant wiring and updating AFCI and GFCI protection throughout. A full rewire on an older home is a larger project, but the scope and the price are laid out before the job starts so there are no decisions made after the fact.
When you call, you describe the job and we give you a rate on the phone. The price is confirmed before anything is scheduled, and you are told what it covers. If the job involves a diagnostic visit first, that is explained on the call before you commit to anything. There is no ambiguity about what the visit includes or what comes next.
Quick response. Code-correct work. Tidy finish.
That is the process for every job, whether it is a single outlet or a full panel replacement.
Call (470) 749-3242 and ask what the job you have in mind will run.
We take calls from across Canton and the communities around it, including Ball Ground, Holly Springs, Waleska, Woodstock, Nelson, Jasper, White, and the Hickory Flat area. If you are in Cherokee County or just across the county line, call and we will confirm whether the address is on the schedule.
We are available every day from 6:30 AM to 9:00 PM. Evening and weekend calls are welcome.
We cover the full range of residential and commercial electrical work, including repairs and troubleshooting, breaker panel upgrades, outlet and switch installation, lighting, ceiling fans, wiring and rewiring, dedicated circuits, EV charger installation, backup generator hookups, and whole-home surge protection. If the job is on the power side of the property, we handle it.
Call (470) 749-3242 and describe what you need, and we will tell you what the work involves and what it costs.
We serve Canton as our primary area and take work throughout Cherokee County, including Ball Ground, Holly Springs, Waleska, Woodstock, Nelson, Jasper, and White. If you are just across the county line, call and we will confirm whether the address is on the schedule. We are available every day from 6:30 AM to 9:00 PM.
The more specific you can be, the more accurate the quote. Let us know what the symptom is, where it is showing up in the house, whether the problem is isolated to one outlet or circuit, and whether the panel has been flagged or upgraded before. If you are adding a circuit or appliance, the size and location of the unit helps us scope the wiring and confirm whether the panel has the capacity to support it.
We go over the job on the call, ask the questions needed to scope it accurately, and give you a price before anything is put on the calendar. Once the scope and price are confirmed, we schedule the visit. You know what the work covers and what it costs before anyone shows up.
Yes. Cherokee County has a wide mix of housing stock, and older homes with knob-and-tube wiring, aluminum branch-circuit wiring, or panels that have not been updated in decades are a regular part of what we do. We assess what is in place, explain what needs to change, and carry the work through to a code-compliant finish.
The scope of the work is the main factor. A single outlet repair is a different job from a panel upgrade or a whole-home rewire, and the price reflects that. Additional factors include whether the panel needs to be upgraded to support new circuits, whether permit work is required, and whether the wiring runs through finished walls or open framing. All of that is discussed on the call before anything is scheduled.
It helps to know where the problem is showing up, which circuits or areas of the house are affected, and whether the issue is new or has been building over time. If you have had previous electrical work done, knowing what was changed and when is useful. For new installations, the make and model of the appliance or charger being added helps us size the circuit correctly.
We handle both. Property managers, landlords, retail spaces, and office build-outs all call us for panel work, circuit repairs, outlet upgrades, and wiring for renovations. Commercial electrical work follows the same process as residential: scoped on the call, priced before anything is scheduled, and carried out to the standard the next inspection expects.
A half-house outage typically points to a problem at the service entrance or a tripped double-pole breaker. Check the panel first to see whether a breaker has tripped to the center position rather than fully off. If resetting it does not restore power, or if you see signs of burning, heat, or arcing near the panel, call us rather than continuing to reset it. We can trace the fault and explain what the panel is doing before recommending a repair.
We are available every day from 6:30 AM to 9:00 PM, including weekends. That range covers most morning, afternoon, and evening windows. When you call, ask what the schedule allows for your preferred time and we will confirm what is open.
It helps to have the panel accessible and any furniture or storage moved away from the outlets, switches, or fixtures we will be working on. The more accessible the work area is, the faster the job moves. If access is limited by built-ins or finished walls, let us know on the call and we can factor that into the scope.
This area has its own wiring habits. The work is matched to them. Everything is left to code.
Canton Electrical Company takes calls every day from 6:30 AM to 9:00 PM. Whether the job is a repair, an installation, a panel upgrade, or a full rewire, electrical work done to the standard the next inspection expects is what every visit is built around.
Call (470) 749-3242 and get a quote for the work you need.
We handle the full range of electrical work for homes and businesses in Canton and Cherokee County, from a single dead outlet to a complete panel upgrade or rewire. Every job starts with a clear scope and a price confirmed before anything is scheduled. The table below covers what each service includes, who it fits best, and what is worth knowing before you call.
| Electrical Service | Scope of Work | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Lighting Installation | Recessed and LED layout, Exterior and security lighting, Under-cabinet and landscape wiring, Fixture replacement | Homeowners updating interior lighting or adding outdoor coverage | Exterior wiring is run to handle weather exposure. Security and motion lighting is wired at the same time as any new exterior circuits. |
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Flickering or dim lights, Tripping breakers, Fault tracing and diagnosis | Any home or business with an unexplained electrical symptom | We trace the fault to its source and explain what we found before any repair work begins. |
| Outlet & Switch Installation | New outlet and switch installation, GFCI and AFCI upgrades, Grounding and bonding corrections, USB and specialty outlet installation | Homeowners adding convenience or correcting code deficiencies | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We upgrade to current standards at the same time as the install. |
| Ceiling Fan Installation | Fan and brace box installation, New wiring where no box exists, Switch and wall control wiring, Replacement of existing fans | Rooms without an existing ceiling fan box or adequate wiring | Installing a fan where none existed before requires a rated box and often a new switch leg. We handle both in one visit. |
| Backup Generator Installation | Transfer switch installation, Generator-to-panel wiring, Interlock kit installation, Critical circuit identification | Cherokee County homes that lose power during Georgia storm season | A properly installed transfer switch isolates the home from the utility line when the generator is running, protecting both the equipment and utility workers. |
| Breaker & Fuse Repair | Breaker testing and replacement, Fuse panel evaluation, Double-pole breaker faults, Half-house outage diagnosis | Homes with breakers that trip repeatedly or refuse to reset | A breaker that keeps tripping often points to an overloaded circuit or a wiring fault, not just a worn breaker. |
| Dedicated Appliance Circuits | Dryer and range circuits, Refrigerator and washer circuits, Workshop and garage circuits, Breaker sized to appliance load | Homeowners adding a major appliance or separating heavy loads from shared circuits | Running a dedicated circuit prevents nuisance tripping and protects both the appliance and the wiring feeding it. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, Main panel replacement, Subpanel installation, Load calculation and service-entrance work | Older homes adding modern loads, EV chargers, or major appliances | Panel upgrades in Cherokee County typically require a permit and inspection. We handle the permit side and make sure the work is ready when the inspector arrives. |
| Wiring & Circuit Installation | New circuit runs, 240V and 220V outlet installation, Whole-home rewiring, Knob-and-tube and aluminum wiring replacement | Older Canton homes with outdated wiring or any property adding new circuits | Knob-and-tube wiring is ungrounded and was not designed for modern loads. Replacement is assessed circuit by circuit based on what is in place. |
| Electrical Safety Inspections | Pre-purchase home evaluations, Post-renovation code checks, Failed inspection follow-up, Smoke and CO detector installation | Home buyers, sellers, and owners with older or unverified wiring | An inspection covers the panel, grounding and bonding, GFCI and AFCI protection, and the condition of outlets, switches, and fixtures throughout the property. |
| Whole-Home Surge Protection | Panel-level surge device installation, Voltage spike interception, Protection for all connected circuits, Walk-through of what the device covers | Homes with sensitive electronics or frequent lightning and grid fluctuations | A panel-level surge protector covers the entire home, unlike a power strip that protects only one outlet location. Lightning activity in north Georgia makes this a practical upgrade. |
| EV Charger Installation | Panel capacity check, Dedicated 240V circuit run, Outlet or hardwired charger connection, Code-compliant circuit sizing | Homeowners adding a Level 2 home charger for an electric vehicle | We check the panel first before scheduling the installation. If an upgrade is needed, we scope both the panel work and the charger circuit together. |
Call (470) 749-3242 and we will go over the job, answer your questions, and give you a price before anything is scheduled.
(470) 749-3242