Some electrical work gets planned weeks out. A homeowner finishing a basement wants new circuits and recessed lighting before the drywall goes up. A property manager needs a panel assessment before a tenant moves in. A business adding equipment needs a load calculation and a dedicated circuit sized to match. That kind of work gets scoped on a call, priced before anything is scheduled, and put on the calendar at a time that works.
Other calls come in the same morning. A breaker that will not reset, an outlet that stopped working, a burning smell near a switch. We take those calls too. We are available every day from 6:30 AM to 9:00 PM, and the price is confirmed before the work begins. We handle both speeds, for homeowners and commercial clients across Peachtree Corners and Gwinnett County alike.
Calling an electrician doesn't have to be stressful, and the pricing conversation is a good place to start. When you call, we go over the job, ask the right questions, and give you a rate before anything is scheduled. You know what the work covers before we arrive.
What changes a quote is what the job actually turns out to involve. The fault itself matters: a failed outlet is a different scope from a wiring fault that traces back three circuits. What has to be opened up to reach the problem matters too. A repair inside an open utility room moves faster than the same repair behind a finished wall. And whether the existing panel can carry a new circuit or a heavier load is something we settle before the circuit gets run, not after.
If a diagnostic visit is needed before the scope can be confirmed, that is explained on the call before you commit to anything. The price is confirmed before the work begins. It is agreed at the beginning.
A three-way switch controls a light from two locations, and a multi-location setup adds more. They come up in stairwells, long hallways, large rooms with two entry points, and garages where both the interior door and the overhead door need a switch. When one switch in the pair stops working, or when a switch was wired incorrectly and never worked right, tracing the fault means following the traveler wires through both boxes. We handle new installations and repairs on existing setups, and the wiring is tested at every switch location before the job is closed out.
A subpanel is the right answer when a detached garage, a workshop, or an outbuilding needs more circuits than a single run from the main panel can support. It distributes power locally and keeps the main panel from carrying a run that was never sized for that load. The installation involves running a feeder from the main panel, sizing the subpanel to the circuits it will carry, and confirming the grounding and bonding at both ends. We do the load calculation before anything is sized so the subpanel is right for what the space actually needs.
A ceiling fan swap is straightforward when the existing box is rated for a fan and the wiring is in good shape. It gets more involved when the box needs to be replaced with a fan-rated one, when a separate switch for the light kit needs to be added, or when the circuit is not grounded. We handle the full installation either way, from the box and wiring through to the final balance and test. New installations where no ceiling box currently exists involve running the circuit from the panel as well.
An inspection covers the panel, the wiring, grounding and bonding, GFCI and AFCI protection, and the condition of outlets, switches, and fixtures throughout the property. We go through the property systematically and document what was found. Common reasons to schedule one include a pending home purchase, a renovation that exposed older wiring, a failed inspection, or a property that has not been evaluated in a long time. The report gives you a clear picture of what is there and what, if anything, needs attention. For the full list, go to our full list of electrical services.
Your time matters, so we keep the wiring job moving, and part of that is being clear upfront about which jobs need a full shutdown and which do not.
Most outlet, switch, and lighting work requires only the circuit being worked on to be isolated. The rest of the house stays on. A panel upgrade or service entrance work is a different matter. That job takes the main breaker off, which means the whole property is without power for the duration. We talk through the timing on the call so nothing is a surprise when we arrive.
For anyone working from home, the circuit isolation question matters. If the circuit feeding the home office is not the one being worked on, that circuit stays live. If it is, we plan the visit around the window that causes the least disruption. Businesses that need to stay open get the same conversation. We confirm which circuits are affected and schedule accordingly.
Good electrical work isn't complicated, it's just done right, but finding the fault is sometimes its own job before any repair work begins.
Intermittent problems are the ones that take the most time. A breaker that trips occasionally but not every time. A circuit that fails under load but tests fine when the load is removed. Something that only shows up in wet weather, when moisture is reaching a connection it should never reach. These faults do not announce themselves cleanly, and testing a circuit that is currently behaving normally will not always reveal what it does when conditions change.
We keep you informed from diagnosis to final test. When a fault is intermittent, we explain what we are looking for, what the likely causes are, and what the diagnostic process involves before any repair is priced. Sometimes the fault shows itself during the visit. Sometimes it takes more than one look. Either way, you hear what we found and what comes next before anything moves forward.
A fault that affects safety or leaves part of a property without power does not wait well. We take short-notice calls when the schedule allows, and we prioritize situations where something is actively wrong rather than inconvenient.
For tenants and occupied properties, access is part of the conversation. We confirm the visit window with whoever is on site, not just with the person who booked the call. If a tenant needs to be present or needs advance notice, that gets arranged before we show up. Businesses that cannot close for a repair get the same planning. Electrical service scheduled without the runaround is the standard we hold every booking to, whether it is planned a week out or called in the same morning.
Landlords and property managers in Peachtree Corners book work on properties they are not always present at. The booking conversation covers who will be on site, who has access to the panel, and whether a tenant needs to be contacted before the visit. The invoice goes to whoever is managing the property. If the owner needs a written record of what was done and what was found, that is part of what the visit produces.
A safety inspection with a written report gives a landlord a documented baseline for the property's electrical condition. That record matters before a new tenancy, after a renovation, or when a prior inspection flagged something that was then repaired. We work through the property systematically and document findings in terms that are useful for a property file, not just for the person standing in the room.
Local means we care what the neighbors think.
We serve Peachtree Corners and the communities around it throughout Gwinnett County and the surrounding area, including Norcross, Berkeley Lake, Doraville, Johns Creek, and Dunwoody. If your address is in this part of the county, call and we will confirm it is on the schedule.
We are available every day from 6:30 AM to 9:00 PM, including weekends. Exterior lighting, panel upgrades, generator hookups, and everything else on the list are all available across the full coverage area.
Call (470) 749-3242 and we will tell you what the schedule looks like.
Yes. We serve Peachtree Corners and the surrounding area, including Norcross, Berkeley Lake, Doraville, Johns Creek, and Dunwoody. If your address is in this part of Gwinnett County, call and we will confirm it is on the schedule. We are available every day from 6:30 AM to 9:00 PM.
Electrical rough-in needs to happen before the walls are closed. If we are brought in after drywall is up, the options for running wiring change significantly, and some configurations become impractical or require opening finished surfaces. We can work with what is there, but the earlier we are involved in a build, the more options are available.
Yes. Every new circuit is labeled at the panel before we leave. We use clear, specific descriptions rather than generic labels so the directory is useful to anyone working on the property in the future. If the existing directory is incomplete or inaccurate, we address that at the same time.
Intermittent faults take more time to diagnose than faults that are present every time. We will ask detailed questions on the call about when the problem shows up, what the conditions are when it does, and whether anything changed before it started. That information shapes how we approach the diagnostic visit. You will hear what we are looking for and what the process involves before any repair is priced.
A wall oven and a cooktop are typically wired on separate dedicated 240-volt circuits, each sized to the appliance. Some configurations allow a combined circuit if the total load is within the breaker rating, but that depends on the specific appliances. We check the nameplate data for both units before recommending the circuit configuration.
The calls we get from Peachtree Corners cover the same range as any established residential city: panel upgrades where the existing service can no longer carry modern loads, dedicated circuits for EV chargers and large appliances, outlet and lighting work, and safety inspections on properties that have not been evaluated in some time. Commercial properties and rental units also generate a steady share of circuit repairs and panel assessments.
Call (470) 749-3242 and describe what you have, and we will tell you what the work involves.
Existing solar or battery storage equipment affects how the panel is loaded and how certain work is sequenced. Before starting any panel work on a property with solar or a battery system, we assess how the existing equipment is connected and confirm that the work we are doing is compatible with it. We do not install or service the solar or battery equipment itself.
We discuss the business's schedule on the call and plan the work around it. Early morning starts, evening work, or phased scheduling across quieter periods are all options depending on what the job involves. The goal is to get the work done without putting the business in a difficult position during peak hours.
Dependable service. A price agreed before we start. Local know-how.
When you call about electrical work in Peachtree Corners, we will ask what the symptom is, where it is showing up, and whether anything changed before it started. By the end of that call, you will know what the work involves, what it costs, and when we can be there.
Call (470) 749-3242 and we will handle the rest.
Also serving: Johns Creek, Dunwoody, Alpharetta, Sandy Springs. Have a look at our complete list of towns.
We handle the full range of electrical work for homes and businesses in Peachtree Corners and Gwinnett County, from a single dead outlet to a complete panel upgrade or rewire. Every job starts with a clear scope and a price confirmed before anything is scheduled. The table below covers what each service includes, who it fits best, and what is worth knowing before you call.
| Electrical Service | Scope of Work | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, Main panel replacement, Subpanel installation, Load calculation and service-entrance work | Older homes adding modern loads, EV chargers, or major appliances | Panel upgrades in Gwinnett County typically require a permit and inspection. We handle the permit side and make sure the work is ready when the inspector arrives. |
| Wiring & Circuit Installation | New circuit runs, 240V and 220V outlet installation, Whole-home rewiring, Knob-and-tube and aluminum wiring replacement | Older Peachtree Corners homes with outdated wiring or any property adding new circuits | Knob-and-tube wiring is ungrounded and was not designed for modern loads. Replacement is assessed circuit by circuit based on what is in place. |
| Whole-Home Surge Protection | Panel-level surge device installation, Voltage spike interception, Protection for all connected circuits, Walk-through of what the device covers | Homes with sensitive electronics or frequent lightning and grid fluctuations | A panel-level surge protector covers the entire home, unlike a power strip that protects only one outlet location. Lightning activity in north Georgia makes this a practical upgrade. |
Call (470) 749-3242 and we will go over the job, answer your questions, and give you a price before anything is scheduled.
(470) 749-3242