Most calls start the same way: something stopped working, or something started behaving in a way it shouldn't. A light that flickers when nothing else is running. An outlet that went dead with no obvious reason. A breaker that trips again before the day is out. The job isn't always named when the call comes in, because the customer knows the symptom, not the cause. Working out what is actually wrong, tracing it to its source, and explaining it before any work begins is part of what every visit covers.
We handle the full range of electrical repair and installation for homes and businesses in Smyrna. Whether the call comes from a homeowner who has lived in the same house for twenty years or a property manager dealing with a fault in a unit, the process is the same. We scope the job on the call, confirm the price before anything is scheduled, and leave the work to the standard the next inspection expects. We take calls every day from 6:30 AM to 9:00 PM, and the first step is always the same: describe what is happening and we'll tell you what it involves.
Your time matters, so we keep the wiring job moving, and part of that is making sure the price is clear before anyone shows up. When you call, we go over the job, ask what the symptom is, where it is showing up, and what the property looks like. That conversation is where the quote comes from. You hear the price before anything is booked.
A few things can move a quote from where it starts. What the fault actually turns out to be matters. What has to be opened up to reach it matters. Whether the existing circuit or panel can carry a change, or whether a service upgrade is needed first, matters too. Those variables are the honest reason a quote is confirmed on the call rather than posted on a page. The scope is settled before the visit, so the price you agree to is the price the job is built around.
If the job involves a diagnostic visit first, that is explained on the call before you commit to anything. Ask what it covers and you get a straight answer.
Good electrical work isn't complicated, it's just done right, and part of doing it right is not taking out more of the house than the job requires. Some work needs a full shutdown. Replacing or upgrading a main panel, for example, requires the service entrance to be de-energized, and that means the whole property goes dark for the duration of that part of the job. We plan that around the property and the people in it.
Most other jobs only need one circuit isolated. Outlet replacements, switch work, adding a circuit to an existing panel, and fixture installations are all done on a single breaker. The rest of the house stays live. For a household where someone is working from home, or a commercial space that has to stay open, that matters.
When a full shutdown is unavoidable, we go over the timeline on the call so there are no decisions made after the fact. You know how long the power will be off and what the sequence of work looks like before the appointment is booked.
A service upgrade replaces an undersized panel with one sized for what the property actually needs. A home that has added appliances, an EV charger, a home office, or a major renovation over the years may be running circuits that the original service was never meant to carry. We start with a load calculation, confirm the right service size, and handle the full scope: panel replacement, service entrance work, and subpanel installation where a detached structure or an addition needs its own distribution point.
A surge protector at the panel level works differently from a strip at the outlet. It intercepts voltage spikes before they reach the wiring and everything connected to it. The region sees its share of severe thunderstorms, and a nearby lightning strike can push a surge through every circuit in the home at once. Panel-mounted surge protection is a single installation that covers the whole property. We walk through what the device covers before we start.
Recessed lighting and LED retrofits are some of the more common installation calls we get. A ceiling that has never had recessed lights requires new boxes and new wiring runs. An existing fixture that is being converted to LED may only need the trim and the driver swapped out. We assess what is there, explain what the installation involves, and run the wiring to code. Exterior lighting, including motion sensor lights and security fixtures, follows the same process: new wiring where it is needed, tested before we leave.
Ground-fault and arc-fault protection are required in specific locations, and the requirements have changed over time. A home that has not had its protection updated may be missing GFCI coverage in a bathroom or kitchen, or AFCI protection on bedroom circuits, that current code calls for. We identify where protection is absent or where an older GFCI device has failed, install the correct breaker or outlet type, and test the circuit before closing out the job. This is one of the most common findings on a safety inspection, and it is a straightforward fix. The range of work covered is explained on our page listing every electrical service.
From older homes to new commercial builds, the wiring inside the walls tells you a lot about when the property was built and what has been changed since. In Smyrna, as across Cobb County, a portion of the housing stock was built in eras when knob-and-tube wiring was standard, when aluminum was used for branch-circuit wiring as a cost-saving measure, or when circuits were extended by whoever was handy rather than by someone following a consistent standard.
Knob-and-tube is ungrounded and was designed for loads that bear no resemblance to what a modern household runs. It is not automatically an emergency, but it does create real limitations. Where insulation has been packed around it, or where circuits have been extended over the years, the risks increase. Replacement involves running new copper wiring on the affected circuits, updating GFCI and AFCI protection, and confirming grounding throughout. We assess the extent of the existing wiring and explain the options before recommending a full or partial rewire.
Aluminum wiring expands and contracts differently from copper and can loosen at connections over time. That loosening generates heat, and heat at a connection is how fires start. The fix depends on how widespread the aluminum wiring is and what condition the connections are in. Options include installing approved connectors at each device, replacing devices with aluminum-rated ones, or rewiring the affected circuits in copper. We go through what is there and explain the tradeoffs on the visit.
Electrical work done to the standard the next inspection expects is the baseline every job is held to, whether the wiring inside the walls is original or has been through several rounds of changes.
Calling an electrician doesn't have to be stressful, and scheduling one shouldn't be either. We are available every day from 6:30 AM to 9:00 PM. When you call, we go over the job, ask the right questions, and confirm what is available. The scope and the price are settled on the call so the visit has a clear purpose before it starts.
Some electrical problems will not wait. A burning smell near a panel, sparking at an outlet, or power missing from part of a property are situations where the call should happen now rather than later. We take short-notice calls when the schedule allows, and we prioritize situations where the fault affects safety or leaves part of a property without power.
For tenants or businesses that have to stay open, we work around what the property needs. We keep you informed from diagnosis to final test, and we plan the work sequence so the disruption is as narrow as possible.
Local permit rules decide which electrical jobs need an inspection. When a permit is required, we handle that side of the job and make sure the work is ready when the inspector arrives. We confirm what applies at the address before anything is scheduled.
We serve Smyrna and the surrounding communities throughout Cobb County, including Vinings, Fair Oaks, Mableton, Marietta, and Austell. If you are in any of these areas, call and we will confirm whether the address is on the schedule.
We are available every day from 6:30 AM to 9:00 PM, including weekends. Evening calls are welcome. The service area covers the city and the communities around it, and we take work across the county when the schedule allows.
The attic does not need to be completely cleared, but we do need a clear path to the areas where the wiring runs. Stored items directly over the work area should be moved before we arrive. If the attic is heavily packed or has loose insulation that would need to be moved, let us know on the call so we can factor that into the visit.
Two chargers require two dedicated circuits, and the panel needs enough capacity to support both simultaneously. Depending on the panel's current load, that may require an upgrade or the installation of a load management device that limits the combined draw to what the panel can handle. We assess the panel first and explain the options before recommending a configuration.
We trace each circuit systematically, identify what it serves, and label it at the panel. This is slower than working from an accurate directory, but it is the only reliable way to confirm what is on each breaker. If the tracing turns up wiring that does not match what the panel suggests, we flag it and explain what needs to change.
The process is the same as any other call. We go over the job, ask what the symptom is and where it is showing up, and give you a price before anything is scheduled. For rental properties, we can work around tenant schedules and plan the work sequence to keep disruption as narrow as possible. If the fault affects safety or leaves part of the unit without power, let us know and we will prioritize accordingly.
An addition or extension is connected to the existing electrical system through a new subpanel fed from the main panel, or by extending circuits from the main panel directly if the run is short and the panel has capacity. We assess the main panel first to confirm it can support the added load. If it cannot, a panel upgrade is part of the scope.
The calls we get most often involve tripping breakers, dead outlets, flickering lights, and panels that are no longer sized for what the home is running. Older properties in the area sometimes have wiring that has been modified over the years without a consistent standard, and that turns up during repairs and inspections. Whatever the symptom, we trace it to the source and explain what we found before any work begins.
Yes. We serve Smyrna and the surrounding communities in Cobb County, including Vinings, Fair Oaks, Mableton, Marietta, and Austell. Call and describe the job and we will confirm whether the address is on the schedule. We are available every day from 6:30 AM to 9:00 PM.
It depends on what was done and whether it meets current code. Some DIY work can be corrected or completed without being removed. Work that is unsafe, incorrectly wired, or not up to the standard an inspection would require usually has to come out. We assess it on the visit and explain what we find before recommending either approach.
Every call is handled the same way. You describe what is happening, we tell you what the work involves, and the price is confirmed before anything is booked. We answer when you call. We explain the work. We leave it safe.
Call (470) 749-3242 to describe the job and get a quote.
Close by, we also take electrical work in: Marietta, Sandy Springs, Brookhaven, Kennesaw. For every town we reach, see our complete list of towns.
We handle the full range of electrical work for homes and businesses in Smyrna and Cobb County, from a single dead outlet to a complete panel upgrade or rewire. Every job starts with a clear scope and a price confirmed before anything is scheduled. The table below covers what each service includes, who it fits best, and what is worth knowing before you call.
| Electrical Service | Scope of Work | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Lighting Installation | Recessed and LED layout, Exterior and security lighting, Under-cabinet and landscape wiring, Fixture replacement | Homeowners updating interior lighting or adding outdoor coverage | Exterior wiring is run to handle weather exposure. Security and motion lighting is wired at the same time as any new exterior circuits. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, Main panel replacement, Subpanel installation, Load calculation and service-entrance work | Older homes adding modern loads, EV chargers, or major appliances | Panel upgrades in Cobb County typically require a permit and inspection. We handle the permit side and make sure the work is ready when the inspector arrives. |
| EV Charger Installation | Panel capacity check, Dedicated 240V circuit run, Outlet or hardwired charger connection, Code-compliant circuit sizing | Homeowners adding a Level 2 home charger for an electric vehicle | We check the panel first before scheduling the installation. If an upgrade is needed, we scope both the panel work and the charger circuit together. |
Call (470) 749-3242 and we will go over the job, answer your questions, and give you a price before anything is scheduled.
(470) 749-3242