Something usually tips it. The outlet that stopped working last month finally takes something with it when it goes, or the breaker trips for the third time in a week and this time it will not reset. That is the moment most people in Brookhaven pick up the phone, and it is the right moment to call. We handle the full range of electrical repair and installation work in this city, from a single dead circuit to a panel that needs replacing entirely.
Residential work makes up a large part of what we do here: older homes where circuits have been added piecemeal over multiple renovations, rental properties where a fault needs tracing before a new tenant moves in, and houses where the panel was sized for a lighter load than the property now draws. We take calls every day from 6:30 AM to 9:00 PM. The price is confirmed before anything is scheduled, and the scope is settled on the call so you know what the visit covers before anyone shows up.
When power disappears from part of a home, the first question is whether the fault is inside the property or upstream on the utility side. We start at the panel. A tripped double-pole breaker, a failing main breaker, or a wiring fault on a branch circuit all show up there first, and most of the time the problem is on our side of the meter and can be addressed on the same visit. We trace the circuit, test the connections, and explain what we found before any repair work begins.
If the panel checks out and the fault points to the service entrance or the utility's supply line, we help you understand what that means and what the next step is. The utility company owns the line up to the meter, and a fault there is their repair to make. We can tell you what we found, what it rules out, and what to report to the utility when you call them. If the service entrance itself needs attention on our side of that line, that work is part of what we do.
We keep you informed from diagnosis to final test, so you are never left guessing about what the problem is or who is responsible for fixing it.
Calling an electrician doesn't have to be stressful, and the scheduling side of it should be the easiest part. When you call, we go over the job, ask what we need to know to scope it accurately, and give you a price before anything is put on the calendar. Appointments are available every day from 6:30 AM to 9:00 PM, including weekends, so most working schedules have a window that fits.
For problems that will not keep, we prioritize calls where safety or habitability is at stake. A panel that is arcing, a circuit that has failed in a way that leaves part of a home without power, or a fault that poses a real risk gets moved up. We take short-notice calls when the schedule allows, and we are straightforward on the phone about what is available.
Rental properties and occupied commercial spaces get the same consideration. If a tenant has to be home, or a business has to stay open while the work happens, that is part of what we work around. The scope and timing are discussed on the call.
Voltage spikes from nearby lightning strikes and grid fluctuations can travel through the utility line and reach every circuit in the home simultaneously. A panel-mounted surge protector intercepts those spikes before they reach the wiring and the equipment connected to it. It is a straightforward installation, and in a region where severe thunderstorms are a regular part of the calendar, it is a practical one. We walk through what the device covers before we start.
s now expected of a modern household, when circuits were sized for a few lights and a radio rather than the appliances, air conditioning, and electronics that a home now runs around the clock. Knob-and-tube wiring, aluminum branch-circuit wiring, and circuits extended without proper grounding are all situations we handle. A full rewire replaces the branch-circuit wiring throughout the home. A partial rewire addresses the circuits or areas where the wiring no longer meets current code. We assess what is in place and explain the options before recommending either.
Replacing a standard switch with a smart switch or dimmer is a small job with a specific requirement: the wiring at the switch location has to support it. Older three-way configurations and boxes without a neutral wire can complicate the installation. We check the wiring before recommending a switch type, and we handle the installation so the load is matched correctly and the circuit functions as it should.
An inspection covers the panel, the wiring, grounding and bonding, GFCI and AFCI protection, and the condition of outlets and fixtures throughout the property. It is useful before a home purchase, after a renovation, following storm or water damage, or when a property has not been evaluated in a long time. You get a clear account of what was found and what, if anything, needs attention. If code corrections are needed, we handle those on the same visit or schedule a follow-up depending on the scope.
Grounding and bonding issues do not always produce an obvious symptom, but they matter for safety and for how the system behaves during a surge or a fault. Older homes that have had circuits added over the years sometimes have grounding that was never brought up to the standard the current code requires. We check grounding and bonding as part of any diagnostic visit and address deficiencies directly rather than noting them and moving on.
Good electrical work isn't complicated, it's just done right, and that applies to grounding corrections as much as it does to a panel replacement. Anyone sizing up a job in Brookhaven may want to read our services page first.
The price for any job is confirmed on the call before anything is scheduled. What moves it is the scope of the work: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry what is being added or changed. A repair that looks like a single outlet can turn into a wiring fault on a shared circuit. A smart switch installation can require a neutral wire that is not currently there. We ask the right questions on the call to scope it as accurately as possible before giving a price.
You're talking to someone who knows the area and the homes in it. If the job turns out to be different from what the call described, we explain what changed and what that means for the price before any additional work begins. The rate is confirmed before we start, and you are told what it covers.
Electrical service scheduled without the runaround is the standard we hold every call to. Ask what the job you have in mind will run, and you get a real answer.
Call (470) 749-3242 and we will go over it.
Most electrical work that changes the wiring, adds circuits, or modifies a panel requires a permit and a follow-up inspection by the local authority. That is true in most jurisdictions, and Brookhaven is no exception in that general sense. The specific requirements depend on the scope of the work and where it falls under the local code.
We handle the permit side of any job that needs one. That means filing the application, scheduling the inspection, and making sure the work is ready when the inspector arrives. Electrical work done to the standard the next inspection expects is the baseline for every job we do, whether a permit is involved or not. If you are not sure whether your job requires one, that is a straightforward question to answer on the call.
We take calls from across Brookhaven and the communities around it in DeKalb County, including Chamblee, North Druid Hills, North Decatur, Doraville, and Sandy Springs. If you are in the area and are not sure whether your address is on the schedule, call and we will confirm it.
We are available every day from 6:30 AM to 9:00 PM. Evening and weekend calls are welcome, and short-notice work is taken when the schedule allows.
Homes built several decades ago often have panels sized for loads that bear no resemblance to what a modern household runs, and circuits that have been extended or modified over the years without a consistent standard. Grounding and bonding deficiencies are common in that era of construction, as are ungrounded outlets that have been covered with three-prong faces without the underlying wiring to support them. These are jobs we handle regularly, and the assessment starts on the call before the visit.
In some situations, a temporary supply to specific circuits can be arranged to keep essential equipment running while the main panel is being worked on. Whether that is practical depends on the job and the property. Discuss it on the call when you describe the scope and we will confirm what is possible.
Yes, in most cases we can give you a price on the call once we understand the scope. The more detail you can share about the symptom, the location, and what the circuit feeds, the more accurate that number will be. If the job requires a diagnostic visit to confirm the fault before pricing, we tell you that on the call before anything is scheduled.
That depends on the scope of what is found. Straightforward corrections, such as replacing ungrounded outlets, adding GFCI or AFCI protection, or addressing a loose connection at the panel, can often be completed in a single visit. Larger corrections, such as rewiring a portion of the home or replacing the panel, are scoped and priced as a separate job. Either way, you hear what was found and what it involves before any correction work begins.
Yes. Any circuit we add, replace, or modify is labeled at the panel before we leave. If we find that existing breakers are unlabeled or mislabeled during the course of the work, we address those at the same time. A panel that is clearly labeled makes every future repair or inspection faster and safer.
Yes. Surface raceway is a legitimate option for adding circuits or outlets where opening the wall would cause significant disruption or damage. It is more visible than in-wall wiring but fully code-compliant when installed correctly. We discuss the options on the visit so you can decide which approach fits the property and the budget.
Changes after rough-in are possible but add cost and time, because wiring that has already been run may need to be rerouted or extended. The earlier a change is identified, the simpler it is to accommodate. If you are considering a layout change during a build or renovation, call us before the walls close so we can assess what is involved.
We work across both. Rental properties and multi-unit buildings in this city generate a steady range of electrical calls: faults that need tracing between tenants, panel work on buildings where the service has not been updated in years, and circuit additions for appliances or EV chargers. The scheduling conversation on the call covers access, tenant coordination, and what the visit involves so the job goes smoothly regardless of the property type.
Describe the problem, get a price, and put it on the calendar. That is all the next step involves. Whether the job is a tripping breaker, a panel that needs upgrading, or wiring that has not been touched in decades, the process starts the same way: a phone call where the scope is worked out and the price is confirmed before anything else happens.
Call (470) 749-3242 and we will take it from there.
Also serving the towns around: Sandy Springs, Dunwoody, Peachtree Corners, Smyrna, Roswell. See the whole of our complete list of towns.
We handle the full range of electrical work for homes and businesses in Brookhaven and DeKalb County, from a single dead outlet to a complete panel upgrade or rewire. Every job starts with a clear scope and a price confirmed before anything is scheduled. The table below covers what each service includes, who it fits best, and what is worth knowing before you call.
| Electrical Service | Scope of Work | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Ceiling Fan Installation | Fan and brace box installation, New wiring where no box exists, Switch and wall control wiring, Replacement of existing fans | Rooms without an existing ceiling fan box or adequate wiring | Installing a fan where none existed before requires a rated box and often a new switch leg. We handle both in one visit. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, Main panel replacement, Subpanel installation, Load calculation and service-entrance work | Older homes adding modern loads, EV chargers, or major appliances | Panel upgrades in DeKalb County typically require a permit and inspection. We handle the permit side and make sure the work is ready when the inspector arrives. |
| EV Charger Installation | Panel capacity check, Dedicated 240V circuit run, Outlet or hardwired charger connection, Code-compliant circuit sizing | Homeowners adding a Level 2 home charger for an electric vehicle | We check the panel first before scheduling the installation. If an upgrade is needed, we scope both the panel work and the charger circuit together. |
Call (470) 749-3242 and we will go over the job, answer your questions, and give you a price before anything is scheduled.
(470) 749-3242